Fire and smoke door signage — the plates a certifier looks at first. Do Not Obstruct, Do Not Keep Open, Offences Relating to Fire Exits and smoke door identification. Fire and smoke door requirements come from the National Construction Code. Supplied in SNA aluminium or ACM silver brushed, made to order in Sydney. Most buildings need one per stairwell door, and bulk discounts apply automatically from 10 signs.
Access
Fire door Signs
Fire door Signs
Fire door Signs
Access
Fire door Signs
Fire door Signs
Fire door Signs
Fire door Signs
Statutory Signs
Fire and smoke door signage
These are the plates a certifier looks at first, and among the most common reasons a building fails an annual fire safety statement. They are cheap, they are specific, and they are routinely left off at handover.
The four that matter
Fire and smoke door signage falls into a small number of required legends. Fire Safety Door — Do Not Obstruct, Do Not Keep Open goes on doors in a fire-resisting construction that must stay shut. Fire Smoke Door — Do Not Obstruct identifies smoke doors, which are a different element with a different purpose. Offences Relating to Fire Exits is the statutory notice on required exit doors, carrying the warning about obstructing or locking an exit. Where a door is held open on a magnetic release, the wording changes again.
The requirements come from the National Construction Code, with the doorsets themselves covered by AS 1905.1. The wording is not a matter of preference — a plate that says the wrong thing is the same as no plate.
Fire services identification
The same range covers the plant and equipment identification that sits alongside: fire control centre, fire indicator panel, sub fire alarm panel, EWIS panel, manual call point, fire hydrant, fire hose reel, fire pump room, sprinkler pump room, sprinkler valve room, fire sprinkler control valve, hydraulic and water shut-off valve. Fire equipment identification of this kind is governed by AS 2444.
These are the signs a responding crew reads under pressure, which is the argument for the engraved aluminium finishes over a printed panel — they stay legible for the life of the building and they do not peel.
Formats and finishes
Sizes run 450 × 100mm, 600 × 100mm, 600 × 165mm and 600 × 200mm horizontal, plus a 180 × 180mm square format. Finishes are satin natural anodised aluminium, brushed aluminium, and composite ACM in silver brushed or white. Prices run $35 to $50.
SNA is the finish most often named on commercial door schedules. ACM silver brushed gives a similar appearance at lower cost for back-of-house doors, and ACM white gives the strongest contrast where a door is poorly lit.
Counting them
Most buildings need one sign per fire door leaf, and fire doors are signed on both faces where both sides form part of an exit path. A four-storey building with two fire stairs will typically run to twenty or thirty plates once the stair doors, airlock doors and services doors are counted. Bulk discounts apply automatically from ten signs, so taking the count off the door schedule in one pass is cheaper than ordering floor by floor.













